What Are the Steps You Can Take Toward Making Your Home Net Zero Energy?  

I don’t know anyone who doesn’t like the idea of saving money, which will happen when you convert your home to “net zero energy.” So, what are the steps you can take to get there?

Net zero energy” means that your home generates more energy than it consumes. With “net metering,” your electric meter runs backwards when your solar panels generate more electricity than you’re using (on a sunny day), then runs forward at night, resulting in zero (or less) net consumption of electric power.

Solar power gets more affordable every year. When I purchased my first 10-kW solar photovoltaic system 15 years ago, the cost was over $60,000, but Xcel Energy gave a rebate of $4.50 per watt, so I got a check for $45,000 from the utility, reducing my net cost to $15,000. Nowadays that same system would cost as little as $15,000 with no Xcel rebate but a 26% federal tax credit.

While you can generate your own electricity, you cannot generate your own natural gas, so terminating natural gas service is key to achieving net zero energy. This involves some major system changes if you are currently heating your home and your water using natural gas, cooking with gas (including with a gas grill) and have a gas fireplace.

There are electric alternatives to all of these uses of natural gas, and you’ll appreciate that eliminating natural gas also eliminates the possibility of a gas explosion and of carbon monoxide poisoning (unless you have a gas powered car).

Heating your home with electricity used to mean installing baseboard resistance heating units in each room, but that is so 20th century. Nowadays electric space heating is done far more efficiently (and evenly) using heat pumps.

Gas forced air furnaces and water heaters are considered to have a 15-year life expectancy, so when yours fail, think of that as an opportunity to adopt heat pump technology for both functions. And a heat pump eliminates the need for a separate A/C unit, since it heats and cools.

Gas furnaces and water heaters generate heat by burning gas. A heat pump moves heat, similar to what A/C does. (How heat pumps work) It cools your home by moving the heat out of your house. If you put your hand over the external compressor unit while it’s cooling your home, you will feel the heat that was moved from inside your home. In heating mode, the process is reversed, and the heat pump moves heat from outdoors into your house. It may surprise you to know that when it’s freezing outside there is actually heat that can be moved from outside to the interior of your house, but it’s true. (Heat pumps work in extremely cold climates) Our office has been heated solely by heat pump since November 2017, and ever since there has never been a day when the system failed to keep our office at 70°F or warmer.

A simple one-unit 12,000-BTU, 29.3-SEER ductless mini-split system from Fujitsu can be found online for $1,961. That’s a small unit, suitable for one room or a garage (a great application!). For our office, we bought a Mitsubishi system in which a single compressor drives three separate wall units, each with its own thermostat.

A heat pump water heater (which I installed at our home) has the compressor built into the unit, above the tank. You can feel cool air emitting from it when it is heating water. I suggest putting it in a wine cellar where it’ll keep the room cool without buying a separate A/C unit.

For cooking, you’ll be amazed and delighted by the induction cooktops that are now widely available. I saw them used on a cruise ship for both cooking and warming surfaces, and the chefs loved them. (Modern cruise ships have eliminated natural gas because of the fire hazard.)

An all-electric home will, of course, demand more electricity, but Xcel Energy now allows you to install enough solar panels to generate double your electrical usage over the prior 12 months. That is more than enough to cover your new electric space heating, water heating and cooking needs, with capacity left over to charge an EV, too.

An important first step in pursuing net zero energy for your home is to reduce your need for energy, and the easiest and cheapest way to do that is to improve your home’s insulation. I had Dennis Brachfield of About Saving Heat blow cellulose insulation into the exterior walls (not just the attic) of a 1940s bungalow I owned, and I was astonished at how much more comfortable the house became. Even if your exterior walls have batt insulation in them, there is still space in the walls to blow in cellulose. (How to insulate an old house)

I learned something interesting from that experience. We all know that walls can radiate heat, such as a brick wall in bright sunlight. Well, walls can also radiate coldness, or suck heat. The air temperature in my bungalow before and after blowing in insulation was the same, but I felt warmer and burned less gas.

You can go beyond improving the insulation of your exterior walls and attic. There are numerous places that allow cold into your home, especially around your windows. Whether or not you install triple-pane Alpen windows, as we did at our office, caulking around the window frames and elsewhere can reduce the energy needed to heat your home.

A blower door test done by a contractor will identify the air leaks in your home. Insulating your attic with blown-in cellulose and your crawlspace with plastic sheeting will also reduce your home’s energy needs whether from gas heating or your new heat pump. (Insulating crawl spaces)

Of course, many homes, especially in older neighborhoods, can’t benefit from solar power because of shading from trees or insufficient south-facing roof area, but you can purchase community solar. (This is also a good solution for condos which have no roof at all.)

The way community solar works is that you invest in solar panels that are part of a solar farm in some distant pasture. The electricity generated by your panels in that remote location is credited to the electric meter for your home or condo. One advantage of community solar is that when you move, you only need to change which meter gets credited with your solar production.

Other ways of reducing energy use include replacing CFL or incandescent light bulbs with affordable LED bulbs and “daylighting” your home or office. (Batteries + Bulbs sell 8-packs of 60W LED replacement bulbs for $6.49, tax included, after $15 instant rebate.) We have “sun tunnels” in our home and office to bring daylight into interior spaces. In fact, on a sunny day we don’t need to turn on any lights in our office. It’s great— and saves energy. We had Design Skylights of Evergreen install Velux sun tunnels at both home and office.

Would you like one of us to visit your home for a private consultation about the sustainability possibilities in your home? Email me at Jim@GoldenRealEstate.com.

LED Lighting Has Some Health & Vision Side Effects Worth Considering

In my July 18th column, online at www.JimSmithColumns.com, I wrote about my favorite home improvements, including the adoption of LED lighting, which I prefer to CFL lighting and is far more energy efficient than incandescent lighting. In particular, I wrote glowingly, so to speak, about “daylight” LEDs — the whitest light available, so well-named for how it matches the color of bright sunlight.

In our office, I replaced all our “soft white” LEDs with “daylight” LEDs to match the color of sunlight coming through our four Velux sun tunnels.

A reader of that column alerted me to some recent research which showed “daylight” LEDs to be harmful to vision, exacerbating macular degeneration, and disruptive of our circadian rhythm (important for good sleep) specifically because it simulates full natural sunlight.

I urge you to Google “daylight LEDs and health,” as I did, and you’ll find that one of the top links is for a June 2016 American Medical Association policy statement (adopted unanimously at their annual meeting) warning about health and safety problems associated with white LED lighting, so common now in the lighting of American streets.

It was right after learning of this research that I bought a new HP laptop computer and noticed that it offers a “nightlight” setting which automatically changes the screen lighting from white to yellow LED light at sunset.  It made me wonder why I was so late to learn about this issue!

The reader who alerted me to this topic suffers from early stage macular degeneration. He said he has replaced all the LED lights in his home with incandescent bulbs. I’m satisfied that changing back to the lower “color temperature” LEDs will be enough. I have noticed that some LED fixtures (like the ones I installed in our conference room) have a switch allowing you to choose between “soft white,” “warm white” and “daylight” temperature settings.